653
uuIf the 12-Volt Battery Is Deadu
Once your vehicle's power system has started, remove the jumper cables in the
following order.
1. Disconnect the jumper cable from your vehicle's nut of the 12-volt battery sensor
- terminal.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's 12-volt battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■
What to Do After the Power System Starts
20 2EX JSS (KE KG)-32TYF6000.book 653 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
