Honeywell CT40 User Manual

8 CT40/CT40 XP Mobile Computer Series User Guide
Battery Part Numbers
CT40 Models
CT40 XP Models
Charge the Battery Before Use
The mobile computer ships with a partially charged battery. Charge the battery
with a CT40/CT40 XP series charging device for a minimum of 4 hours. Using the
computer while charging the battery increases the time required to reach a full
charge.
Note: Using the computer while charging the battery increases the time required to reach
a full charge.
Model Configuration
x = configuration variations
Battery P/N
CT40-xxx-xxxxx0x 318-005-011
CT40-xxx-xxxxxHx 318-055-H67
CT40-LON-xxxxxAx 318-055-067
CT40-xxx-xxxxxBx 318-055-067
CT40-xxx-xxxxxDx 318-055-D67
Configuration number (CN) is located on the label in the battery well of the mobile computer.
Model Configuration
x = configuration variations
Battery P/N
CT40P-xxx-xxxxxHx 318-055-H67
CT40P-xxx-xxxxxAx 318-055-067
CT40P-xxx-xxxxxBx 318-055-067
CT40P-xxx-xxxxxDx 318-055-D67
Configuration number (CN) is located on the label in the battery well of the mobile computer.
Caution: Read Battery Recommendations and Safety Precautions on page 15
and all cautionary markings on the battery, charging peripheral, and
device using the battery before attempting to install, use, or charge
the battery.

Honeywell CT40 Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Operating System	Android
Display	5-inch, 1280 x 720 HD, LED backlight
RAM	2 GB
Storage	16 GB
Camera	13 MP autofocus with LED flash
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC
Durability	IP64 rated
Drop Specification	1.2m (4ft) to concrete, 1.8m (6ft) with rubber boot
Barcode Scanning	1D/2D imager
Operating Temperature	-20°C to +50°C (-4°F to +122°F)
GPS	Yes
Weight	278 g (with battery)