Honeywell CT40 User Manual

CHAPTER
3
CT40/CT40 XP Mobile Computer Series User Guide 37
USE THE IMAGER
Use this chapter to understand how to scan barcodes, configure the scan settings,
and capture images using the integrated image in the computer.
About the Imager
The CT40 series high-performance imager options:
•N3601 Imager
• N6603 Slim Imager
• N6703 Ultra-Slim Imager
• N6803 FlexRange Imager
• S0703 Uncoded 2D Imager
The CT40 XP series high-performance imager options:
•N6700 Imager
• N6703 Ultra-Slim Imager
• N6803 FlexRange Imager
• S0703 Uncoded 2D Imager
You can use the imager in the computer as a scanner or camera.
Use the imager as a scanner to read 1D and 2D barcode symbologies, composite
symbologies, and postal codes. It also supports omni-directional scanning for
greater flexibility in real-world settings. By default, the scanner feature is enabled
and uses the default scan profile. You can modify the Default Profile or create new
profiles for custom applications from the Settings > Honeywell Settings >
Scanning.
Use the imager as a camera to capture black and white images, such as signatures
or pictures of damaged inventory.
Note: Instead of using the internal imager, you can also use Bluetooth communications to
connect the computer to an external scanner, such as the Granit™ 1990i and 1991i.

Honeywell CT40 Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Operating System	Android
Display	5-inch, 1280 x 720 HD, LED backlight
RAM	2 GB
Storage	16 GB
Camera	13 MP autofocus with LED flash
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC
Durability	IP64 rated
Drop Specification	1.2m (4ft) to concrete, 1.8m (6ft) with rubber boot
Barcode Scanning	1D/2D imager
Operating Temperature	-20°C to +50°C (-4°F to +122°F)
GPS	Yes
Weight	278 g (with battery)