Honeywell CT40 User Manual

CT40/CT40 XP Mobile Computer Series User Guide 21
Insert a microSD Card
You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off.
4. Remove the battery from the computer, refer to page 10.
5. Lift up the edge of the SD card access door.
6. Press down gently and slide the card holder toward the open access door. Lift
the edge of the holder up.

Honeywell CT40 Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Operating System	Android
Display	5-inch, 1280 x 720 HD, LED backlight
RAM	2 GB
Storage	16 GB
Camera	13 MP autofocus with LED flash
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC
Durability	IP64 rated
Drop Specification	1.2m (4ft) to concrete, 1.8m (6ft) with rubber boot
Barcode Scanning	1D/2D imager
Operating Temperature	-20°C to +50°C (-4°F to +122°F)
GPS	Yes
Weight	278 g (with battery)