Honeywell CT40 User Manual

76 CT40/CT40 XP Mobile Computer Series User Guide
• If the pairing request requires a PIN, enter the PIN, and then tap Pair.
6. Tap pair. When the device is successfully paired with the computer, the device
name appears under Paired devices.
7. (Optional) Once paired to a device, you can connect manually to the device.
Tap the device under Paired devices. The word “Connected” appears under the
paired device name.
The status icon changes from to .
Note: To disconnect a paired device, tap next to the name of the paired device and then
tap Forget.
Rename the Computer and View File History
You can change the name of the computer to make it easier to identify when
pairing with other Bluetooth enabled devices and view statistics about received
files.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Connected devices > Connection preferences > Bluetooth.
3. Tap Device Name to change the device name. Type the new name and then tap
Rename.

Honeywell CT40 Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Operating System	Android
Display	5-inch, 1280 x 720 HD, LED backlight
RAM	2 GB
Storage	16 GB
Camera	13 MP autofocus with LED flash
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC
Durability	IP64 rated
Drop Specification	1.2m (4ft) to concrete, 1.8m (6ft) with rubber boot
Barcode Scanning	1D/2D imager
Operating Temperature	-20°C to +50°C (-4°F to +122°F)
GPS	Yes
Weight	278 g (with battery)