Honeywell DC33XB - Function Keys; Table 1-1 Function of Keys

Introduction
2 UDC3300 Basic Model: DC33XB User Manual 12/00
1.3 Function Keys
Table 1-1 Function of Keys
Key Function
SET UP
• Places the controller in the Configuration Set Up group select mode.
• Sequentially displays Set Up groups and allows the FUNCTION key to
display individual functions in each Set Up group.
FUNCTION
LOOP 1/2
Used in conjunction with the SET UP key to select the individual functions of a
selected Configuration Set Up group. .
LOWER
DISPLAY
Selects an operating parameter to be shown in the lower display.
MANUAL
AUTO
Alternately selects AUTO or MAN. .
SETPOINT
SELECT
Hold key down to cycle through configured setpoints.
RUN
HOLD
• Alternate action switch initiates or holds the Setpoint Ramp or Setpoint
Program.
• Acknowledges a latched alarm 1.
▲
Increases the selected parameter value.
▼
Decreases the selected parameter value.