Section 11 - W7220 JADE™ Economizer Module
63-8594-02 Honeywell Economizers 136
Running the Software
After installing PCMOD software to your desktop, double click on the JADE™ Trade
configuration tool icon to open it. This is the first page you’ll see. A small sub-screen will display
basic information, including note on COM port settings.
Click on “OK.”
The configuration screen will appear with the system settings.
Before you proceed, check your COM Port.
Go into Settings in the header on the page and choose the port for your TUSB3410 COM Port,
using the drop down menu.
To Next Page
Loading...
Need help?
General
