E-MON CLASS 3200 METER
62-0397—02 4
Internal circuit components are extremely sensitive to electrostatic
discharge. Prior to handling or touching internal circuitry, discharge
any static buildup on your person. To discharge yourself, touch a
grounded metal object such as conduit or an earth-grounded
enclosure.
Use of this instrument, the E-Mon Class 3200 meter, in a manner
inconsistent with this manual or not specified by the manufacturer in
writing, can cause permanent damage to the unit and/or serious injury
to the operator. The protection and safety features provided by this
equipment may become impaired or otherwise compromised.
NOTE: If any trouble arises during the installation or functional verification
operations, do not immediately remove the unit. Before removing the
unit, contact Honeywell’s technical support and/or engineering depart-
ment. Honeywell’ s technical department will assist you in detailed trou-
bleshooting of the E-Mon Class 3200 meter installation and assist you
in getting the unit operating correctly.
62-0397_C.fm Page 4 Wednesday, May 9, 2018 9:28 AM
To Next Page
Loading...
Need help?
General
