Checking RF communication 4.7.3
The evotouch controller sends test signals to the assigned
underoor heating controller in order to test the signal
strength.
When the underoor heating controller receives the test
signal, the eld strength is indicated by ashing of the
green zone LED (2).
1 pulse = sufficient
5 pulses = strong
Note
Sensor information relates to the sensor in the zone
controlled by the HCE80.
Deactivating the RF communication check
Press the NEXT button. f
Completing conguration
In the following screen press the DONE button. f
Configuration of the HCE80(R) / HCC80(R) underfloor heating controller is completed.
To Next Page
Loading...
