Honeywell Fire-Lite Alarms MS-9050UD - Phone Line; Central Station

Operating Instructions
MS-9050UD PN 52413:C 01/23/08 167
4.22.11 Phone Line
Pressing 2 while viewing Read Status Screen #4 will display the following screen:
This screen indicates the both the Primary and Secondary phone lines have been configured for
touchtone dialing operation.
4.22.12 Central Station
Pressing 3 while viewing Read Status Screen #4 will display the following screens:
Central Station Screen #1 indicates whether the Central Station Reporting is enabled or disabled, if
the Reports will be sent to one or both the Primary and Secondary Central Station phone numbers
and the Call Limit for DACT trouble calls within a 24 hour period. Central Station Screen #2
provides information on the Primary and Secondary Central Station programming which includes:
• Test Time Interval
• Account Code
• 24 Hour Test Time
• Phone Number
• Communication Format
• Event Codes
PHONE LINE
PRIMARY TOUCHTONE
SECONDARY TOUCHTONE
READ STATUS
1=ANN-BUS
2=PHONE LINE
3=CENTRAL STATION
Read Status Screen #4
CENTRAL STATION
REPORTING ENABLED
REPORT BOTH
CALL LIMIT 10
Central Station Screen #1
CENTRAL STATION
1=PRIMARY
2=SECONDARY
3=REPORT STYLE
Central Station Screen #2