Ultra HD IP Camera User Guide
26
Configuring Audio Settings
You can configure audio settings for Main Stream, Sub Stream 1, and Sub Stream 2 profiles
on the Setup > Audio Setup > Audio page.
To enable audio for the stream, select the Enable check box, select the format (G.711A,
G.711Mu, G.726, AAC), and then select a sampling frequency (8–64 kHz).
In the Properties area, enable or disable noise filtering, and adjust the microphone and/or
speaker volumes by moving the sliders. Click the+ and - signs to make fine adjustments. Click
Save to apply the settings.
To Next Page
Loading...
