Honeywell H4L6GR2 - 6 Configuring Event Settings; Configuring Alarm Events

Configuring Event Settings
41
6. Configuring Event Settings
This chapter contains the following sections:
• Configuring Alarm Events, page 41
• Configuring System Events, page 43
• Configuring Motion Detection Events, page 45
• Configuring Camera Tampering Events, page 47
• Configuring Scene Change Events, page 48
• Configuring Audio Events, page 49
• Configuring Face Detection Events, page 52
• Configuring People Counting Events, page 53
Configuring Alarm Events
You can configure alarm event settings on the Setup > Alarm Setup > Alarm Setup page.
To enable the alarm function:
1. Select the Enable check box.
2. From the Alarm Input list, select the alarm input that you want to configure (Alarm1 or
Alarm2).