HC900 Control System Fault Detection and Response - HC900 SIL Compatibility
60 HC900 Process & Safety Controller Safety Manual Revision 1.9
01/14
900C50S-0360-00 C50 Controller Process & Safety Uses Scanner 1
900C70S-0360-00 C70 Controller Process & Safety Uses Scanner 1
900S50S-0360-00 IO Scanner 1 Process & Safety Used with C50S and C70S
900C75S-0360-00 C75 Redundant Controller Process & Safety Uses Scanner 2
900S75S-0360-00 IO Scanner 2 Process & Safety Used with C75S
900A01-0202 Analog Input
(8 channel)
Process & Safety
900A16-0101 Analog Input Hi level
(16channel)
Process & Safety
900B01-0301 Analog Output, 0 to 20mA,
(4 channel)
Process & Safety Uses A01 or A16 for AI-V and
AO-V function blocks
900B08-0101 Analog Output, 0 to 20mA,
(8 channel)
Process & Safety Uses A01 or A16 for AI-V and
AO-V function blocks
900B16-0101 Analog Output, 0 to 20mA,
(16 channel)
Process & Safety Uses A01 or A16 for AI-V and
AO-V function blocks
900G01-0202 Digital Input, Contact type,
(16 channel)
Process & Safety Input channels must have an
individual series blocking
diode
900G02-0202 Digital Input, 24VDC
(16 channel)
Process & Safety
900G03-0202 Digital Input, 120/240 VAC,
(16 channel)
Process & Safety
900G04-0101 Digital In, 120/240 VAC,
125VDC
(16 channel-Isolated)
Process & Safety
900G32-0101 Digital Input, 24VDC
(32 channel)
Process & Safety
900H01-0202 Digital Output, Relays
(8 channel)
Process & Safety for DO-V USE
G02 for 24 VDC
G03 for 120/240 VAC
G04 for 120/240VAC/125
VDC
Function block input must be
inverted if the N.C. contact is
used.
900H02-0202 Digital Output, 24VDC
(16 channel)
Process & Safety for DO-V USE
900G02 or 900G32
To Next Page
Loading...
