Honeywell HCE80 - English; Table of Contents; HCE80(R); HCC80(R) Mounting and Operation

Introduction 2
System overview 3
Function overview 5
Mounting and installation 6
Creating a zoning plan 6
Zoning plan (sample) 7
Safety instructions 8
Installing the underfloor heating controller 9
Settings at the underfloor heating controller 10
Cabling 11
Commissioning 13
Connecting devices (binding) 14
Binding room setpoint generators/sensors
with the evohomecontroller 14
Binding the room device CM927
with the underfloor heating controller 17
Binding the underfloor heating controller
without time program 18
Cancelling the assignment of zones (rooms) 21
Checking the installation 22
Help with problems 23
Changing the fuse 23
Restoring the factory settings
at the underfloor heating controller 23
Fault displays 23
Errors and elimination 24
Options 25
Boiler feedback 25
Allocating relay modules for controlling
the heat generator 25
Cooling with CM927 26
Time program for cooling function 27
Appendix 28
Navigation and function overview 28
Technical data 29
WEEE Directive 2012/19/EU 29
Device and function definition in accordance
with EN60730-1 29
Declaration of conformity 29
HCE80(R) / HCC80(R) Mounting and operation
1
Contents