www.honeywell.com/security
26 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
Configuring Presets
To add a preset:
1. Position the PTZ dome for the preset using the pan, tilt, and zoom controls below the
preview window. By default, Step is set at 5. Select a lower value for more precise
positioning.
2. In the Preset section, click Add. A preset is added to the list.
3. Click the Save button to save the preset.
4. To add another preset, repeat steps 2 to 4 above. You can add up to 80 presets.
To rename a preset:
•In the Preset section, double-click the name of the preset to make it editable, type the
new name, and then press Enter.
To remove a preset:
•In the Preset section, click the Delete button of the preset that you want to remove.
To remove all presets:
•In the Preset section, click Clear.
To Next Page
Loading...
