www.honeywell.com/security
50 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
Configuring Audio Settings
You can configure audio settings for Main Stream, Sub Stream 1, and Sub Stream 2 profiles
on the Setup > Audio Setup > Audio page.
To enable audio for the stream, select the Enable check box, select the format (G.711A,
G.711Mu, G.726, AAC, MPEG2-Layer2, G.722.1, G.729), and then select a sampling
frequency (8 or 16 kHz).
In the Properties area, select the audio input type (LineIn, Microphone), enable or disable
noise filtering, and adjust the microphone and/or speaker volumes by moving the sliders.
Click the + and - signs to make fine adjustments.
Click Save to apply the settings.
To Next Page
Loading...
