PTZ Operation | 29
800-22456 - A - 04/2017
Configuring Patterns
To set up a pattern:
1. In the Pattern section, select the pattern number that you want to configure from the
Pattern No. list. You can configure up to 5 patterns.
2. Click Set.
3. Click Start Record to start recording.
4. Using the controls below the preview window, move the camera and adjust the zoom,
focus, and iris as desired.
5. Click Stop Record to stop recording.
6. To preview the pattern, click Start. To stop the pattern, click Stop.
Configuring Auto Pan
To set up autopan (360-degree continuous rotation):
1. In the Auto Pan section, set the rotation speed by
dragging the Pan Speed slider left or right or by
clicking the – and + signs.
2. To start autopan, click Start. To stop autopan, click
Stop.
To Next Page
Loading...
