800-22456 - A - 04/2017
5
Configuring Video and Audio Settings 5
This chapters contains the following sections:
• Configuring Video Settings, page 41
• Configuring Audio Settings, page 50
Configuring Video Settings
This section describes how to configure camera properties (picture, exposure, white balance,
day and night, and lighting compensation) and video streaming properties (format,
resolution, frame rate, bit rate, and I-frame interval).
Configuring Camera Settings
You can configure camera properties on the Setup > Camera Setup > Properties page.
Profile
In the Profile box, select the camera profile that you want to configure settings for: Normal,
Day, or Night.
Picture
In the Picture area, you can set the picture style and
adjust the picture settings.
In the Style list, select Soft, Standard, or Vivid.
Adjust the brightness, contrast, saturation, sharpness,
chroma control, sharpness, and sharpness control, and
gamma levels by dragging the slider left or right to
decrease or increase the value. Click the – and + signs to
make fine adjustments.
To flip the image, set AOV to 180° Inverted.
If the camera is mounted on a pole or in an environment
subject to vibration, you can set EIS (Electronic Image
Stabilization) to ON to improve image stability.
To freeze the image when the camera goes to a preset, set Freeze to ON.
Click Save to apply the settings.
To Next Page
Loading...
Need help?
General
