Honeywell HRDP DVR - Sensor

Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-02089 Rev E 47
10/08
Sensor
Sensor Setup
1. Use the arrow buttons to select Sensor 1 and press ENTER to change
to N/O (Normally Open) or N/C (Normally Closed).
2. Repeat for all sensors.
3. Select SAVE and press ENTER to save settings and exit Sensor Setup.
Relay Setup
1. Use the arrow buttons to select Relay 1 and press ENTER to turn OFF
or ON.
2. Repeat for all relays.
3. Select SAVE and press ENTER to save settings exit Sensor Setup.
INPUT SENSOR ACTION ALARM MONITOR
NO.
1
2
3
4
SIGNAL
ON
ON
ON
ON
SET CLEAR
NO.T
1
2
3
4
5
6
7
8
TYPE
N/O
N/O
N/O
N/O
N/O
N/O
N/O
N/O
9CH-16CH