Configuring Event Settings
101
•
File Name Select a file for the voice prompt.
7. Click Apply to save your settings.
Configuring Temperature and Humidity Camera（IOT）
You can configure the temperature and humidity data of camera with such sensors and
configure the alarm event settings.
To use this function, please make sure there is at least one camera with temperature and
humidity sensor has been connected to the Device.
Configuring Temperature
To configure the temperature:
1. Go to Main Menu Setting Event IOT Temperature.
Figure 10-15
2. On the Temperature tab, select the Channel you want to configure and input the Alarm
Name.
3. Select the Enable check box to enable Temperature configuration.
4. Select the actions that you want the system to initiate when the selected event occurs:
To Next Page
Loading...
Need help?
General