Performance Series HQA Digital Video Recorder Local User Guide
110
Configuring HDD Settings
To configure HDD settings
1. Go to Main Menu Setting Storage HDD Manage.
Figure 11-4
SATA
o indicates the current HDD is normal.
x indicates there is an error.
− indicates that there is no HDD.
? indicates that a HDD is damaged.
Device Name The HDD name.
Type The HDD type (read-write or read-only)
Status The current operating status of the HDD.
Free Space/
Total Space
The amount of free space remaining on the HDD/
The total capacity of the HDD.
2. The HDD is configured as read-write by default. To change the HDD type to read-only, in
the Type column, select Read-only HDD. The DVR restarts to apply the new setting.
3. To erase all the data from the HDD, click Format. The message "Confirm format on the
selected device?" Click OK to continue.
To Next Page
Loading...
Need help?
General