Performance Series HQA Digital Video Recorder Local User Guide
118
b.
Set the Start Time as Mar 2nd Su 02:00 (the second Sunday in March at 2:00 a.m.).
c. Set the End Time as Nov 1st Su 02:00 (the first Sunday in November at 2:00 a.m.).
4. Click Apply to save your settings.
To synchronize the system time with the Network Time Protocol (NTP)
1. Ensure that the DVR is connected to the Internet.
2. Go to Main Menu Setting System General Date&Time.
3. On the Date&Time tab, select the NTP check box.
4. In the Server IP box, enter the IP address of the NTP server that you want to use (for
example, time.nist.gov).
5. Ensure that Port is set to 123.
6. To change the frequency with which the system time synchronizes with the NTP server,
enter a new time in the Update Period box. The default setting is 60 min.
7. Click Manual Update to manually synchronize your system time with the NTP server.
8. Click Apply to save your settings.
Configuring Holiday Settings
To configure holiday settings
1. Go to Main Menu Setting System General Holiday.
Figure 12-3
2. On the Holiday tab, click Add a Holiday. The Add a Holiday window appears.
To Next Page
Loading...
Need help?
General