Honeywell IntelliPath Series User Manual

LTE-I Installation and Setup Guide
2
System Features
Basic features of the communicator include:
 Remote Services allow the end user to access their security system from their computer
via a website. Availability of this service is controlled by the dealer via the web-based
programming tool on the AlarmNet 360 website. Once enabled, remote access can be
programmed via web or 7720P programming tool.
 Supports dynamic or static IP addressing, and installs behind firewalls without
compromising network security (provided that the Communication Path includes IP).
 Quick connection to compatible Honeywell series control panels
 Simple programming using a 7720P programming tool
 Reports fire, burg, and status messages via the Internet
 Reports messages via cell as backup to Internet reporting (provided that the
Communication Path includes cell)
 Allows uploading and downloading of control panel data over the Internet
 Supports remote control of alarm systems via Remote Services feature
About AlarmNet-i Internet Application
AlarmNet-i is a fully encrypted, secure method of delivering alarm messages from a protected
premise to an AlarmNet equipped central station. An Internet Communicator transmits status,
supervisory, and alarm messages to the AlarmNet Control Center using a broadband Internet
connection.
The AlarmNet Control Center identifies, validates, and forwards the messages to the appropriate
AlarmNet central station. AlarmNet-i has an unlimited account capacity.
Encryption
The communicator uses 256 bit AES (Rijndael) encryption (which is required for certain
government installations). The AlarmNet-i AES Encryption Software Module Version 1.0
contained in the Honeywell products has NIST approval. Listings for this approval can be found
at http://csrc.nist.gov/groups/STM/cavp/documents/aes/aesval.html and search for “Certificate
number 979.”
UL
The IP and Cell signaling paths are suitable for encrypted line security when programmed for
1 minute IP/Cell Fault Times. The system configurations are not suitable as a Dual Line
Signal transmission system.
Remote Services
Honeywell now offers a new series of web based services that provides consumers with the
ability to communicate with their security system remotely in a number of ways. These new web
services will allow users to:
 Access their security system from a computer via a website (Remote Access feature)
 Receive email and text message notifications of system events (Multi-Mode feature)
 Perform system functions and receive confirmations using text messages (SMS feature)
Dealers will initially enroll their customers for web services during account programming through
the AlarmNet 360 website. The features that can be enabled include Remote Access and Multi-
Mode. Once enabled, the specific programming fields associated with these features can be
programmed into the communications device either remotely using the AlarmNet 360 website or
locally using the 7720P local keypad programming tool.
UL
Remote Access and Multi-Mode have not been evaluated by UL.

Honeywell IntelliPath Series Specifications

General

Brand	Honeywell
Model	IntelliPath Series
Category	Cell Phone
Language	English