8 - 9
Network Tab
The appearance of the network tab depends on the type of firmware selected.
Network with SIM Card
Select Connection
Select connection and tap Apply. A “Network changed successfully” message is displayed.
Close the tab and view the signal strength icon in the main window. Once the signal strength is displayed, you can
establish a connection.
Select Network From Available Networks
Select the network and tap on the register button. If the change is successful you will see the message “Network
changed successfully”.
Note: When you are registered to a CDMA network, you cannot select the network. "All CDMA network" is shown
instead.
Note: The network list only appears if the connection setting is Only use GPRS or Only use UMTS/HSPA.
Setting Function
Select automatically Selects the best suited network automatically
Use GPRS/EDGE only Use only GPRS/EDGE for a connection
Use UMTS/HSPA only Use only UMTS/HSPA for a connection.
To Next Page
Loading...
