Honeywell Marathon - Beeper Volume; Decode Aiming Pattern

13 - 12
Beeper Volume
To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume bar code.
Decode Aiming Pattern
Note: This parameter only applies when in Decode Mode. See Operational Mode (page 13-15).
Scan Enable Decode Aiming Pattern to project the aiming pattern during bar code capture, or Disable Decode Aiming Pat-
tern to turn the aiming pattern off.
Low Volume
* Medium Volume
High Volume
* Enable Decode Aiming Pattern
Disable Decode Aiming Pattern