EasyManua.ls Logo

Honeywell Marathon - Vehicle Dock Technical Specifications; Battery Charger Technical Specifications; Electrical; Temperature

Honeywell Marathon
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 - 5
Vehicle Dock Technical Specifications
Battery Charger Technical Specifications
Electrical
Note: Battery packs may leak up to 1mA current through the battery contacts when left in an unpowered battery charger
charging pocket.
Temperature
Dimensions
Operating Temperature -20°C - 50°C (with Marathon in dock)
Operating Humidity 5 to 95% non-condensing
Storage Temperature -30°C- 60°C degree
Storage Humidity 5 to 95% non-condensing
Vibration 5G (w/ SSD)
Shock 30G (w/ SSD)
IP Rating IP55 design
Weight 4 lb 4.7 oz / 1.95 kg
Dimensions Width 9" / Length 6" / Height 7.5"
Width 22.8 cm / Length 15.2 cm / 18.8 cm
Ports Power, 9 pin serial, 15-pin serial, Ethernet/USB, GPS antenna, Mobile Net antenna
Parameter Minimum Maximum Note
Power Supply Input Voltage (V AC-IN) 100 VAC 240VAC Auto-switching
Power Supply Input Frequency (freq) 50Hz 60Hz
Power Supply Output Voltage 19VDC 6.32A
Function Minimum Maximum Note
Operating 0°C (32°F) +50°C (120°F)
Battery Pack
Charging
10°C (50°F) +45°C (113°F) Battery packs will not begin charging when their internal
temperature is outside this range.
Storage -20°C (-4°F) +70°C (160°F) Unit is off.
Weight Battery Charger: < 3.5 lbs (1.6 kg) (no batteries, no power connection)
Power Supply: < 1.875 lbs (.85 kg) with cables attached
Length 36 cm (14.2 in)
Width 21.2 cm (8.35 in)
Height 6.55 cm (2.58 in)
Plug Type IEC320/C14

Table of Contents

Other manuals for Honeywell Marathon

Related product manuals