13 - 50
Code 39 Check Digit Verification
When enabled, this parameter checks the integrity of a Code 39 symbol to ensure it complies with specified check digit
algorithms.
Only Code 39 symbols which include a Modulo 43 check digit are decoded when this parameter is enabled.
Note: When Transmit Code 39 Check Digit (page 13-50) is enabled, this parameter must be enabled too.
Enable this feature if the code 39 bar codes contain a Modulo 43 check digit.
Set this parameter by scanning either of the bar codes shown below.
Transmit Code 39 Check Digit
When enabled, the check digit is transmitted with the data.
Note: Code 39 Check Digit Verification (page 13-50) must be enabled for this parameter to function.
Set this parameter by scanning either of the bar codes shown below.
Enable Code 39 Check Digit Verification
* Disable Code 39 Check Digit Verification
Enable Transmit Code 39 Check Digit
* Disable Transmit Code 39 Check Digit
To Next Page
Loading...
