EasyManua.ls Logo

Honeywell Marathon - Network Configuration Settings

Honeywell Marathon
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 - 4
Network Configuration
There are several networking options available for the Marathon.
802.11 Wireless Radios
Refer to the instructions for configuring the 802.11 radio in Summit Wireless Network Configuration (page 6-36).
Ethernet Connector
A wired Ethernet connection is only available when the Marathon is docked in a desktop dock. See Desktop Dock (page 11-
1) for more information.
For more information on configuring the Microsoft Windows network settings, refer to Help and Support on the Windows
Start menu or commercially available Windows networking literature.
GPS (Optional)
When the GPS module is factory installed in the Marathon, based on the current Marathon configuration the GPS module
will use COM 5 on the Marathon to retrieve latitude (the location north or south of the equator in degrees) and longitude
(the angular distance from the Prime Meridian in degrees).
To verify COM port settings follow this path: Start > Settings > Control Panel > System > Hardware > Device Manager >
Ports (COM / LPT).
WWAN
Refer to the section on Using OneClick Internet (page 8-5) and Install SIM Card (page 8-2).
Bluetooth
Refer to the section on configuring the Bluetooth radio. See Bluetooth Configuration (page 7-1).

Table of Contents

Other manuals for Honeywell Marathon

Related product manuals