8 - 12
PIN Tab
You can Activate/Deactivate the PIN or Change the PIN.
Activate/Deactivate PIN
This panel is only displayed when a firmware is loaded that requires a SIM card (such as AT&T or T-Mobile).
By default, you have to enter the PIN each time you start WebToGo OneClick Internet using a modem card.
Deactivate the PIN to avoid entering the PIN each time.
Change PIN
This dialog lets you change your PIN.
Setting Function
Current PIN Enter the current PIN.
New PIN Enter the new PIN.
Verify PIN Verify the new PIN by entering it again.
To Next Page
Loading...
