MeshGuard User’s Guide
5.1 Detection Mode
The MeshGuard can operate in fixed or portable mode. Whenever you start MeshGuard, it is automatically in fixed
Detection Mode, which is the default.
The MeshGuard displays the current reading:
Pressing [MODE] steps through the Detection Mode screens:
Press [MODE], and it displays the sensor type:
Press [MODE], and it alternates between EUI (Extended Unique Identifier) and its value:
Press [MODE], and it alternates between Pan and ID (Personal Area Network Identifier) and its value:
Press [MODE] to return to the detector reading:
To Next Page
Loading...
