Honeywell MetroSelect - Telepen Bar Code Configuration; Plessey Codes Formatting

2–7
³ 1 0 0 0 0 3
* Disable Code 11
³ 1 0 8 0 0 5
* Check for 1 Code 11 Check Digit
³ 1 0 8 0 1 5
Check for 2 Code 11 Check Digits
³ 1 0 8 0 0 4
* Do Not Check for 2 Code 11 Check Digits
³ 1 0 8 0 1 4
Check for 2 Code 11 Check Digits if Code
Length is Greater Than 10 Characters
Telepen
³ 1 0 0 0 1 7
Enable Telepen
³ 1 0 0 0 0 7
* Disable Telepen
³ 1 0 0 0 1 6
Enable ALPHA Telepen
³ 1 0 0 0 0 6
* Disable ALPHA Telepen
Plessey Codes
³ 1 0 0 2 1 2
Enable MSI Plessey
³ 1 0 0 2 0 2
* Disable MSI Plessey
³ 2 0 0 7 0 4
* No MSI Plessey Check Digit – Plessey bar
codes will not be tested for a check digit.