Honeywell MetroSelect User Manual

17–2
³ 1 1 8 7 1 3
* CodeGate Active Out of Stand
³ 1 1 8 7 0 3
CodeGate Inactive Out of Stand
Laser/Scan Modes
³ 4 1 8 3 0 4
* Normal Scan – The laser turns on after the IR
senses a bar code. The laser remains on for
approximately 3 to 10 seconds.
³ 4 1 8 3 2 4
Blinky Scan – Laser turns on after the IR senses
a bar code. The laser will blink on/off for
approximately 60 seconds.
³ 4 1 8 3 3 4
Continuous Blinky Scan – The laser blinks
continuously and the IR is inactive. This feature
is not available for the VoyagerPDF series.
³ 4 1 8 3 4 4
Custom (One Shot) Scan – The laser turns off
after a good decode.
³ 4 1 8 3 5 4
Enable Manual Activation Mode – The laser
activates when the CodeGate button is pressed.
³ 1 2 0 0 0 0
* Normal Timeout (Button Act)
³ 1 2 0 0 1 0
0.5 Second Timeout (Button Act)

Honeywell MetroSelect Specifications

General

Brand	Honeywell
Model	MetroSelect
Category	Barcode Reader
Language	English