Honeywell MetroSelect - OCIA Communication Settings; Enable OCIA Mode; Load OCIA Defaults

12–1
OCIA
³ 4 1 5 5 4 4
Enable OCIA Mode – Select this option if
communications requires OCIA (Optically
Coupled Interface Adapter). The host clocks this
serial interface.
³ 9 9 9 9 9 3
Load OCIA Defaults
³ 2 1 7 7 0 6
Enable DTS/Siemens
³ 2 1 7 7 1 6
* Enable DTS/Nixdorf
³ 2 1 7 7 3 6
Enable NCR-S
³ 2 1 7 7 2 6
Enable NCR-F
³ 1 1 7 7 0 5
* Transmit character count with non-UPC codes
while transmitting in OCIA NCR-S mode
³ 1 1 7 7 1 5
Do not Transmit character count with non-UPC
codes while transmitting in OCIA NCR-S mode
12