Response time (T
90
): 2 seconds
Accuracy (Isobutylene): 10 to 2000 ppm: ±3% at calibration point.
PID Detector: Easy access to lamp and sensor for cleaning and replacement
Correction Factors: Over 200 VOC gases built in
Calibration: Two-point field calibration of zero and standard reference gases
Patented Reflex PID™ technology
Calibration reference: Store up to 8 sets of calibration data, alarm limits, and span values
Inlet Probe: Flexible 5" tubing
Radio module: BLE (2.4GHz), Bluetooth (2.4GHz) or RF module (868MHz or 915MHz)
Keypad: 1 operation key and 2 programming keys; 1 flashlight switch
Direct Readout: Instantaneous, average, STEL, TWA and peak value, and battery voltage
Intrinsic Safety: ATEX
2460 II 2G Ex ia IIC T4 Gb
Ex ia IIB T4 Gb
Sira 17ATEX2082X
IECEx CSA 10.0005X Ex ia IIC T4 Gb
Ex ia IIB T4 Gb
EX ia IIC T4 Gb (with bat pack 059-3051-
000)
EX ia IIB T4 Gb (with bat pack 059-3052-
000)
CSAE 21UKEX2051X
EM Interference: Highly resistant to EMI/RFI. Compliant with EMC RE-D (RF Modules)
Alarm Setting: Separate alarm limit settings for Low, High, STEL, and TWA alarm
Operating Mode: Hygiene or Search mode
Alarm:
Buzzer 95dB at 30cm and flashing red LEDs to indicate exceeded preset limits, low battery
voltage, or sensor failure
Alarm Type: Latching or automatic reset
Real-time Clock: Automatic date and time stamps on datalogged information
Communication: Upload data to PC and download instrument setup from PC via USB on charging station.
Enhanced datalogging capability through BLE module and mobile app
Sampling Pump: Internally integrated. Flow rate: 450 to 550 cc/min.
Wireless Network:
Mesh RAE Systems Dedicated Wireless Network (or Wi-Fi/LoRa network for Wi-Fi/LoRa-
equipped instruments)
Bluetooth Low energy
Wireless Frequency: ISM license-free band, 902 to 907.5 MHz and 915 to 928 MHz, FCC Part 15, CE RE-D
IEEE 802.11 b/g bands (2.4 GHz)
Modulation: 802.15.4 DSSS BPSK
RF Power (Tx): 10dBm
Temperature: -20º C to 50º C (-4º to 122º F)
Handheld PID Monitors 116 User Manual
To Next Page
Loading...
