Auto/manual/snapshot datalogging
The instrument has three datalog types:
Auto Default mode. Collects datalog information when the instrument is sampling.
Manual
Datalogging occurs only when the instrument’s datalogging is manually started (See "Manual datalog" on
page84 for more information.)
Snapshot
Datalogs only during snapshot (single-event capture, initiated by pressing [MODE]) sampling. See "Snapshot
datalog" on page84 for more information.
Note: You can only choose one datalog type to be active at a time.
Handheld PID Monitors 52 User Manual
To Next Page
Loading...
