CHAPTER
7
OPERATING MODES
MiniRAE 3000+ & ppbRAE 3000+
Your instrument operates in different modes, depending on the model and its factory default
settings. In some cases, you can change modes using a password and the instrument’s
navigation. In other cases, you must use Safety Suite Device Configurator (SSDC) software.
The default setting for your instrument is:
User Level: Basic
Operation Mode: Hygiene
This is outlined in detail on See "Basic user level/hygiene mode" on the next page for more
information.
The other options, covered later in this guide, are:
User Level: Advanced (page 74)
Operation Mode: Hygiene
User Level: Advanced (page 74)
Operation Mode: Search
Using Safety Suite Device Configurator (SSDC) allows access to other options. In addition,
Diagnostic Mode (See "Diagnostic mode" on page98 for more information.) is available for
service technicians.
Handheld PID Monitors 36 User Manual
To Next Page
Loading...
