CHAPTER
16
HYGENE MODE
Note: This feature is not included on MiniRAE Lite+.
The instrument usually operates in Hygiene Mode, which provides basic functionality. However,
it is possible to operate it in a second mode called Search Mode. Here are the primary
differences:
Hygiene
Mode:
Automatic measurements, continuously running and datalogging, and calculates additional exposure
values.
Search Mode: Manual start/stop of measurements and display of certain exposure values.
Basic user level & hygiene mode
The default setting is navigated in the following way:
Note: Dashed line indicates automatic progression.
Pressing [N/-] steps you from screen to screen. Options include clearing the Peak value and
turning on the instrument’s PC Communications for data transfer to a PC or AutoRAE 2.
Handheld PID Monitors 93 User Manual
To Next Page
Loading...
