Honeywell MiniRAE 3000+ - UltraRAE 3000+ Overview

UltraRAE 3000+
The UltraRAE is actually two monitors in one:
l
Compound-specific monitor
l
VOC monitor
As a compound-specific monitor, it takes timed measurements and uses a separation tube in
conjunction with software that enables the UltraRAE 3000+ to give specific readings on one
particular type of compound, such as benzene or butadiene.
As a VOC monitor, the UltraRAE 3000+ operates in different modes. In some cases, you can
change modes using a password and using the instrument’s navigation. In other cases, you
must use Safety Suite Device Configurator (SSDC) software.
The following two sections cover operation in the two modes.
l
See "UltraRAE 3000+ operation" on page 40 for more information.
l
See "VOC operation - UltraRAE3000+" on page47 for more information.
The next diagram shows the basic flow of the UltraRAE 3000+’s functions. The area with the
gray field is the compound-specific (tube) mode, while the rest shows VOC mode. Navigate
through the steps by using the [Y/+] and [N/-] keys as shown in the diagram.
Note: If you use a password to access Programming Mode (See "Programming mode" on
page68 for more information.), then the navigation changes slightly, entering part of Advanced
Hygiene Mode’s settings (See "Advanced user level" on page95 for more information.).
Compound-Specific (Tube)
Note: Dashed line indicates automatic progression.
Handheld PID Monitors 38 User Manual