Basic user level & search mode
With the instrument in Operation Mode in MiniRAE Lite+: Search Mode, enter User Mode and
select Basic User Level (refer to the section called User Mode for instructions).
When the instrument is in Search Mode, it only samples when you activate sampling. When you
see the display that says, “Ready…Start sampling?” press [Y/+] to start. The pump turns on and
the instrument begins collecting data. To stop sampling, press [N/-] while the main display is
showing. You will see a new screen that says, “Stop sampling?” Press [Y/+] to stop sampling.
Press [N/-] if you want sampling to continue.
Note: Dashed line indicates automatic progression.
Handheld PID Monitors 96 User Manual
To Next Page
Loading...
