Language
English is the default language, but other languages can be selected for the instrument.
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio button” indicates “on”).
3. When you have completed your selection, press [MODE].
l
Press [Y/+] to save your new language choice.
l
Press [N/-] to undo it and return to the previous language selection.
Real Time protocol
Real Time Protocol is the setting for data transmission.
The choices are:
P2M
(cable)
Point to multipoint. Data is transferred from the instrument to multiple locations using a wired connection.
Default data rate: 19200 bps.
P2P
(cable)
Point to point. Data is transferred only between the instrument and one other location, such as a computer.
Default data rate: 9600 bps.
Wireless Data is transferred wirelessly and can be received by receivers.
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio button” indicates “on”).
3. When you have completed your selection, press [MODE].
l
Press [Y/+] to save the new real-time communications protocol.
l
Press [N/-] to undo the change and move to the next sub-menu.
Auto-Zero at startup
Note: This is not recommended for ppbRAE3000+ or UltraRAE3000+.
Always make sure the instrument is turned on in VOC-free environment. When Auto-Zero At
Startup is on, the instrument performs a zero calibration when it is turned on.
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio button” indicates your
selection).
3. When you have completed your selection, press [MODE].
l
Press [Y/+] to save the change.
l
Press [N/-] to discard the change and move to the next sub-menu.
Handheld PID Monitors 89 User Manual
To Next Page
Loading...
