21
INSPIRE E10/E15 Control Panels - Operating instructions
ENABLE / DISABLE DEVICES BY
DETECTION ZONE
You can selectively disable and enable devices in Detection
Zone.
Enable/Disable
Enable / disable Devices, Zones
etc
If disabled, the
Display shows:
DISABLE
LED indication
given:
: 1 Point
2 : 15 Points
3 : 15 Points
4 : 5 Points
5 : 5 Points
How to Enable / Disable Device(s) in
a Zone
01 Select the Menu icon and log in with
your Access level 2 password.
02 Select ‘Enable/Disable’ and then the
select zones view icon .
03 Select the Detection Zone tab .
04 Expand the zone details and
momentarily select the required
Device(s) . Note you can select
multiple Devices.
05 Select either ‘Permanently Disable’ or
‘Enable’ button . Note the selected
Zones(s) are permanently disabled or
enabled.
The DISABLE LED is lit or unlit
dipending on the selection made.
To Next Page
Loading...
