35
INSPIRE E10/E15 Control Panels - Operating instructions
UPDATE
The 'Update' firmware feature is used by Commissioning Engineer to update the Control panel firmware. This
feature is mentioned here for information only, as it is not accessible using Access Level 2 password.
BUZZER SETTINGS
The 'Buzzer Settings' is located under 'Settings' and is used by Commissioning Engineer. This feature is
mentioned here for information only, as it is not accessible using Access Level 2 password.
ENABLE COMMISSIONING MODE
The 'Enable Commissioning mode' feature is located under 'Settings' and is mentioned here for information only.
This feature used by commissioning engineer.
There is no need to access 'Update', 'Buzzer Setting' and 'Enable Commissioning Mode' features for day
to day operation of the fire alarm system.
To Next Page
Loading...
