25
INSPIRE E10/E15 Control Panels - Operating instructions
TECHNICAL ALARMS
A Technical Alarm is generated when a
configured input from fire alarm interface
becomes active as a result of a fault from
Air Conditioning Systems in the buildings,
Elevators, Heating and Cooling systems and
any technical equipment in the building to
notify Responsible persons or warn the general
public if there is a risk or hazard.
A typical application of Technical Alarm is to
connect to flow guards from Sprinkler Systems
that are not allowed to give a fire alarm where
local regulations disallow.
These non-fire events appear are referred to as
Technical Alarm in blue on the panel display.
The panel will log each Technical Alarm with
date and time of occurrence:
The above example shows a Technical Alarm 'TAL' from a
device that occurred at time and date shown and is
linked to Control Zone 6002.
To view Technical Alarms during event condition, such as a
Fire condition, then click on the icon.
Technical Alarms are normally cleared automatically unless
they are latching events.
How to clear a latched Technical Alarm
01 Select the 'Reset' button to clear a latched Technical
Alarm.
To Next Page
Loading...
