23
INSPIRE E10/E15 Control Panels - Operating instructions
FAULT WARNINGS CONDITION
All active Fault Warnings events will appear on the display and
can also be listed by selecting the active Fault summary icon
. The Fault LED is lit and the Buzzer sounds to give an audible
announcement.
FAULT
Mute Buzzer
MUTE BUZZERSILENCE-RESOUND
RESET
What do I need to do?
01 To silence the panel buzzer sound,
select the ‘MUTE BUZZER’ button
.
02 Where there are many active events
listed use the Search facility to
locate the exact event(s) of interest
or view.
03 Expand a fault view by selecting
the down arrow icon . If device
disablement is required then select
the ‘Disable Device’ button.
04 You can view further information
about a fault event by selecting the
‘More Info’ button . The previous
associated fault history can be
viewed here . On selecting the
down-arrow icon you can view
information about the device having
a fault.
05 By selecting the ‘Cause and
Solution’ tab you can investigate
the fault and find solutions to repair
the fault. Log in with your Access
level 2 password. Select the 'RESET'
button to clear repaired faults.
To Next Page
Loading...
