Honeywell oneWireless XYR 6000 - Certifications and Approvals

1. Introduction
1.4. About the transmitter
The XYR 6000 Pressure DP model type is capable of measuring mass flow and volumetric flow. When
minimum and maximum flow rate values are configured as PV scale 0% and 100% values at given PV
units of measure, and the respective DP values at those limits are configured as the calibration scale 0%
and 100% values, the PV value becomes a flow rate in the selected units of measure. Minimum and
maximum flow rate data at given DP values is either provided on or with orifice plates, or is commonly
available according to orifice plate size.
EEPROM
EEPROM
A/D
DP or AP
Sensor
SP
Sensor
Temp
Sensor
Multi-
plexer
Electronics Housing
Meter Body
Radio
Board
Pressure
Input
Micro-
processor
Micro-
processor
EEPROM
Factory
Characterization
Data
Configuration
Data
Battery
Antenn
a
Measurement
Board
Configuration
Data
Figure 1-1 XYR 6000 Functional Diagram
2 OneWireless XYR 6000 ISA100.11a Compliant Pressure Transmitter User's Manual Revision 3
March 2012