5. Operation
5.5. Transmitter menu
26 OneWireless XYR 6000 ISA100.11a Compliant Pressure Transmitter User's Manual Revision 3
March 2012
5.5 Transmitter menu
Menu tree
At the PV display, press Enter to access the menus. To interact with the menus use the Device Local
Configuration onscreen buttons (page 30) or the buttons on your PDA.
Table 5-8 Menu tree
Menu item Description
CAL
Calibration menu. May be password-protected. See Table 5-9 on page 30 for
passw
ord number entry.
CAL ZERO Calibrate zero. See page 11.
RADIO Radio menu
PRI RSSI
Primary receive signal strength. Read only. Signal strength 00 is too weak to
connect to the network.
Displayed Value
Value dBm Rx Margin dB
00 < -86 < 10
01 -86 to -81 10 to 15
02 -80 to -75 16 to 21
03 -74 to -69 22 to 27
04 -68 to -63 28 to 33
05 -62 to -57 34 to 39
06 -56 to -51 40 to 45
07 -50 to -45 46 to 51
08 -44 to -11 52 to 85
09 ≥ -10 Saturation
SEC RSSI Secondary receive signal strength. Same as PRI RSSI. Read only.
WFN ID Wireless Field Network ID. Read only.
DEV ADD Device address. Read only.
TX POWER Radio transmit power. Read only.
To Next Page
Loading...
