Honeywell oneWireless XYR 6000 - Dimension Drawings; Table 6-7 Drawing Numbers for DP Models Stdw1 Xx, Stdw9 Xx; Table 6-8 Drawing Numbers for DHGP Models STGW944, STGW974; Table 6-9 Drawing Numbers for GP;AP Models Staw1 Xl, Stgw9 Xl, Stgw1 Xl, Stgw9 Xl

54 OneWireless XYR 6000 ISA100.11a Compliant Pressure Transmitter User's Manual Revision 3
March 2012
6.9 Dimension drawings
Dimension drawings are available for each transmitter model. If you need a copy of a drawing, please
determine the appropriate drawing number from the following tables and contact your Honeywell
representative.
Table 6-7 Drawing numbers for DP models STDW1xx, STDW9xx
Angle Bracket (“MB” or “SB”) Flat Bracket (“FB”)
Vertical Pipe Horizontal Pipe Vertical Pipe Horizontal Pipe
50022275 50022274 50022273 50022272
Table 6-8 Drawing numbers for DHGP models STGW944, STGW974
Angle Bracket (“MB” or “SB”) Flat Bracket (“FB”)
Vertical Pipe Horizontal Pipe Vertical Pipe Horizontal Pipe
50022279 50022278 50022277 50022276
Table 6-9 Drawing numbers for GP/AP models STAW1xL , STGW9xL, STGW1xL, STGW9xL
Angle Bracket (“MB” or “SB”) Flat Bracket (“FB”)
Vertical Pipe Horizontal Pipe Vertical Pipe Horizontal Pipe
50022279 50022278 50022277 50022276
Table 6-10 Drawing Numbers for Flush, Extended and Pseudo Flanged Models
STFW1xx, STFW9xx, Flush Flange 50060110
STFW1xx, STFW9xx Extended Flange 50060111
STFW1xF, STFW9xF Pseudo Flange 50060112
Table 6-11 Drawing Numbers for DP Remote Seal Models STRW1xD, STRW9xD
1 Remote Seal on High Side 1 Remote Seal on Low Side 2 Remote Seals
Flat Bracket Horizontal 50060115 50060119 50060829
Flat Bracket Vertical 50060116 50060120 50060830
Angle Bracket Horizontal 50060117 50060121 50060831
Angle Bracket Vertical 50060118 50060122 50060832
Table 6-12 Drawing Numbers for GP/AP Remote Seal Models STRW1xG, STRW9xG,
STRW1xA, STRW9xA
Flat Bracket Horizontal 50060131
Flat Bracket Vertical 50060132
Angle Bracket Horizontal 50060133
Angle Bracket Vertical 50060134