To Next Page

To Previous Page

PW6K1ICE System Configuration via Web Interface

PW6K1ICE Installation and Configuration Guide, Document 800-07985V1, Revision A 23

3.2 Login

1. Launch your web browser. Type the IP address in the browser’s URL field and

press Enter.

2. Click the “Click Here to Login” link to display the User Name and

Password fields.

Figure 3-1: Configuration Manager Login Screen

If DIP Switch #1 is ON, then set

• Default Username to “admin”

and

• Default Password to “password”.

This switch is read on the fly. There is no need to reboot the controller.

• If the security certificate of your server is not valid continue with the next step

“Security Certificate” on page 24.

• If the security certificate of your server is valid, jump to “Web Server

Configuration” on page 27.

Honeywell PW6K1ICE User Manual

Questions and Answers: