Honeywell PW6K1ICE User Manual

28 www.honeywell.com
PW6K1ICE System Configuration via Web Interface
Web Server Configuration
3.3.2 Network Settings Screen
1. Click the Network link on the navigation bar to display the Network Settings
screen where you can configure the IP address and hostname information:
Figure 3-10: Network Settings Screen
2. Click the Use Static IP Configuration option button to assign a static IP
address, and enter the following information in the appropriate fields:
• IP Address
• Subnet Mask
• Default Gateway
3. Enter the appropriate IP address for the DNS Server field.
4. Click Accept to save the settings.

Honeywell PW6K1ICE Specifications

General

Model	PW6K1ICE
Category	Controller
Type	Intelligent Controller
Output Type	Relay
Contact Rating	2A @ 30 VDC