PW6K1ICE System Configuration via Web Interface
Web Server Configuration
PW6K1ICE Installation and Configuration Guide, Document 800-07985V1, Revision 29
3.3.3 Host Communication Screen
1. Click the Host Comm link on the navigation bar to display the Host
Communication Settings screen where you can configure the communication
port information:
Figure 3-11: Host Communication Screen
2. From the Communication Address drop-down list, select one of the eight (0
to 7) available communication addresses for the PW6K1ICE board.
3. For the Primary Host Port, make the following selections:
a. Connection Type. Select IP Server.
b. Data Security. Select one of the following values from the drop-down
list: None, Password/AES.
c. Port Number. Enter the port number through which the host computer
can communicate with the PW6K1ICE board.
d. Select either Allow All or the Authorized IP Address Required option
button.
– Allow All, as the label suggests, allows all IP addresses to
communicate with the PW6K1ICE.
– If you select the Authorized IP Address Required option, also
enter in the Authorized IP Addresses fields all the IP addresses
that would be allowed to communicate with the PW6K1ICE.
To Next Page
Loading...
